CWT5016 Low Cost GSM IOT Controller with Free IOT solutions platform

System Feature

• Adopted highly integrated industrial 32-bit ARM MCU
• Double watchdog to ensure stability
• Dual digital filters for anti-noise
• Network-reconnect and retransmission to ensure data accurately transmit
• Synchronize clock with multiple way, Sms, NTP, CwtIO Server
• Automatically execute preset task by schedule(second, minute, day, week, month)
• Can automatically execute tasks according to preset Events
• Provide configure software, visual programming, over 100 parameters can be set
• Optional inside battery that life is 8-20 hours, cellular module Intelligent sleep when power lost

DI feature

• Accept NO or NC dry contact

DO(T) feature

• Transistor output(drive voltage=power supply voltage, Drive current≤500mA)
• Remote or local event activate DO on/off/pulse
• Remember status when power lost

DO(K) feature

• Relay NO output(load: 2A / 125VAC,220VDC)
• on/off/pulse DO by remote control or local event
• Remain down status when power lost

AI feature

• 4-20mA (option: 0-5V) in, Sampling frequency: 33Hz, 10-bit precision)
• Convert 4-20mA(0-5V) to physical value
• Configurable parameters for signal acquisition, alarm, data communication
• Detect connect or disconnect to alarm

SMS feature

• Can add 10 administrator numbers for alarm and remote control
• Send sms alarm when input is triggered or reach alarm level
• Customizable sms messages, like alarm, receove, report
• Query any IO channel’s status or value via sms command
• On/off/pulse output by sending sms
• Can set interval to report IO channel's status or value by sms
• Remote update parameters by sms
• Sms remind for sim card overdue
• Sms alar for power lost and recover
• Wireless network communication
• With 2g, 3g, 4g, Wi-Fi version
• Support TCP/IP two-way communication with Max.4 servers(IP or domain)
• Events(e.g. alarm, timer) trigger upload data
• Communicate with server by optional Cwt_IO, Modbus TCP, http post protocol
• Transfer RS485 or RS232 Data to wireless network

Modbus feature

• polling salve over RS485 with modbus rtu protocol
• Can work as a modbus slave to be read/write by master(HMI, SCADA etc.)
• Support Modbus RTU to TCP convert over Ethernet or GPRS/3G

TI feature

• Can set high or lower level to alarm, data log via wireless network
• Can switch ℃ or οF
• Support probe disconnect alarm

internet of things devices

internet of things products

GSM Low Cost IOT Gateway Device Controller With Free IOT Solutions Platform CE Approved Images